OWC Mercury Elite Pro Manual de usuario descargar pdf (Pagina 7)

OWC Mercury Elite Pro Chapter 2 - System Setup

2.1 Hard Drive Assembly & Installation (continued)

2 SYSTEM SETUP

Place your drive mechanism into the chassis and onto the bridge card, and press

the drive towards the ports to rmly ax the drive into the SATA connector. You

may need to wiggle the drive from side to side to t it in between the rubber

grommets that the drive is secured with. Be sure to not tear them when inserting

the drive into the chassis.

➃

➙

Insert (but not fully tighten) 2 of the included Phillips screws into the drive

mechanism through the rubber grommets on the side of the enclosure. Repeat

on the other side of the enclosure - there are 4 screws total. Once you have

inserted all 4 screws into the drive you can fully tighten them.

➂

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Sin comentarios

OWC Mercury Elite Pro Manual de usuario Pagina 7