OWC Mercury Elite Pro Manual de usuario descargar pdf (Pagina 8)

OWC Mercury Elite Pro Chapter 2 - System Setup

2.1 Hard Drive Assembly & Installation (continued)

2 SYSTEM SETUP

Place your drive mechanism into the chassis and onto the bridge card,

and press the drive towards the ports to rmly ax the drive into the SATA

connector. You may need to wiggle the drive from side to side to t it in

between the rubber grommets that the drive is secured with. Be sure to not

tear them when inserting the drive into the chassis.

➂

➃

➙

Insert (but not fully tighten) 2 of the included Phillips screws into the drive

mechanism through the rubber grommets on the side of the enclosure.

Repeat on the other side of the enclosure - there are 4 screws total. Once

you have inserted all 4 screws into the drive you can fully tighten them.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 24 25

Sin comentarios

OWC Mercury Elite Pro Manual de usuario Pagina 8